We are Structural Engineers providing a vast array of Structural Engineering Services, including retaining wall engineering. Please visit our Structural Engineer San Antonio for a list of some common engineering services that we provide in addition to retaining wall structural engineering. See our of to see some of our retaining wall projects.
For retaining walls we provide:
- Structural Engineering Design of Concrete Retaining Walls
- Structural Engineering Design of Block Retaining walls
- Structural Inspections of Retaining walls
- Construction Inspections of Retaining walls
- Soil slope stability analysis (avoids the use of a retaining walls for up to 4 feet)
Below is in article written by our staff to better explain the basics of retaining walls. Enjoy! And please, ask us questions if you have any.
In this article we’ll try to cover the most common questions and basic topics of concrete retaining walls as well as block retaining walls(more commonly known as Modular or segmented Block walls). We’ll also give you one good cheap and inexpensive solution for those homeowners who’d like to save a buck or two.
A retaining wall, as the name implies, is a wall meant to retain something. Engineering wise, a retaining wall imposes lateral forces against the wall and these lateral forces can be from everything, such wind, earth, fluids, etc. However, in the construction world, when you say retaining wall everyone understands it as been a wall built to retain soil or earth. In fact, many times the term retaining wall usually infers a concrete retaining wall.
So, in terms of performing a function, a retaining wall is just a retaining wall. The only difference between the types of retaining walls has to do with the way the retaining is done. There are many different types of retaining walls but in this article we’ll deal with the most common ones (which happen to be also the most cheap and economical): concrete (cantilever) retaining walls and (modular or segmented) block or stone retaining walls.
A concrete retaining wall usually refers to a cantilever retaining wall. The reason it’s cantilevered is because the wall is being supported by the footing below the wall and there’s nothing supporting the top of the wall. As the soil pushes against the wall, the wall will want to slide away and also topple (i.e. overturn). So, to resist these kinds of lateral forces the concrete wall retains the soil by being heavy enough to not slide and wide enough to prevent overturning. The footing is typically long enough so that dirt will be also over it causing more weight and thus helping with the sliding and overturning of the concrete retaining wall.
An important factor in any retaining wall is to question the possibility of accumulating water where the dirt is, because water makes the soil heavier. So you need to consider very carefully how you plan to provide drainage behind the wall to provide relief from the water from pushing against the wall (called hydrostatic forces). Drainage is either done by means of weep holes (holes in the bottom of the wall) or by means of a pipe drain running along the back of the wall.
Because different types of soils act differently when water is added, then using the correct type of soil is key to a successful design and economical retaining wall. For example, Gravel provides good drainage while clay doesn’t, so gravel will not be affected too much by water, but clay will(however, gravel is expensive but clay is dirt cheap).
Other important factors affecting the forces in the retaining wall would be the slope of the retained soil at the top of the wall,whether there is parking or a house or building near by, the slope of the soil at the toe of the wall, vehicle barriers, fences, etc.
A very good rule of thumb to start preliminary Engineering design of a concrete retaining wall (as well as a good estimate of the cost) is that the wall height is about the same as the footing width (so, if from top of footing to top of wall you have 10ft, then you should expect about 10ft of width of footing). Another good starting point is to assign one inch of thickness to the wall for every foot of height of wall (so, if you’re wall is10ft tall, then you should expect about a 10” thick wall), however, the wall should never be less than 6” thick. For the thickness of the footing a good guess is about twice the thickness of the wall. In San Antonio, Texas, a good way to have a general estimate the cost is to figure about $700 per cubic yard (divide cubic feet by 27 to get cubic yards), or about $50 per square foot of face, assuming site is accessible. These rough values include labor, materials, for the concrete work as well as the earth work and backfill required. Once you hired a Structural Engineer to design your retaining wall, you will be able to get a set of plans that will help you get very good pricing estimate. For more info Click Structural Engineer San Antonio.
Modular Block or stone walls are also retaining walls, but the way they retain soil is completely different than your typical cantilever concrete retaining walls. It is very difficult to explain, but the main component of a stone or block modular or segmented retaining wall is the stuff you can’t see, which is buried in the dirt behind the wall, the geotextile fabric, also known as geogrid. As the soil pushes the wall away, the soil also wants to “slice” (so, there are two modes of failure, just like a typical concrete retaining wall). Layers of a kind of geogrid are placed at different intervals across the height of the wall and attached to the block. As the soil pushed against the wall, it is restrained by this geogrid which extends past the “slice” point, thus putting the grid in tension.
The cost to build a concrete retaining wall is about the same to about twice the cost of modular block wall. It all depends on what you’re doing,where you’re doing it, and who’s doing it, and what structural engineer designed the retaining wall. For instance, are you putting some really nice stone blocks? Are you building the wall is a space where there will be a lot of earth work required? Are you building the wall in San Antonio,Texas, or San Francisco, California? In California labor and materials will be substantially more expensive than in Texas, and because of Earthquakes you'll need more materials and Engineering than say in San Antonio, Texas.
Each type of retaining wall will have some advantages and some disadvantages. One advantage of the concrete retaining wall is that for a taller wall you won’t lose much land to build it as compared to a block wall,because the block wall will not be completely straight, but needs to be built at an angle. The other advantage of the concrete retaining wall is that is fast and easy to build, and it doesn’t require all the trigger work that a modular block wall needs. An advantage of block is that it could be substantially cheaper and it could look a lot more aesthetically pleasing than a concrete retaining wall. Again, you want to make sure that you do have a Structural Engineer design your wall. More info on what is a Structural Engineer can be found on our article Stuctural Engineering.
Residential customers have an advantage. If you have a problem in your house or property where maybe you need a short wall, say 2 ft high, then you may consider a very economical solution, which is to sand bag the soil, and step it in layers so that no soil can push or slide away. You would need to protect each bag in plastic to prevent infiltration of water, but besides that, it’s all earth work, no concrete, no geogrids, and best of all, it could save you tons of money – and it may be years before you need to go any type of remedial work. Get a structural engineer and start saving money.And for more on where do you need a Structural Engineer in San Antonio, just click Structural Engineering San Antonio.
We hope this article was very helpful to you, and if you have any more questions or need help on your next project, please do not hesitate to